Enviar mensaje
Hogar
Productos
Sobre nosotros
Viaje de la fábrica
Control de calidad
Éntrenos en contacto con
Solicitar una cotización
Noticias
guangqing(anhui)gas technologies co.,ltd.
Inicio ProductosEquipos de reparación de IMPCO

Equipos de reparación de RK PEV IMPCO para el regulador de dos fases

China guangqing(anhui)gas technologies co.,ltd. certificaciones
China guangqing(anhui)gas technologies co.,ltd. certificaciones
Estoy en línea para chatear ahora

Equipos de reparación de RK PEV IMPCO para el regulador de dos fases

RK PEV IMPCO Repair Kits For Two Stage Regulator
RK PEV IMPCO Repair Kits For Two Stage Regulator

Ampliación de imagen :  Equipos de reparación de RK PEV IMPCO para el regulador de dos fases

Datos del producto:
Lugar de origen: LOS E.E.U.U.
Nombre de la marca: IMPCO
Número de modelo: RK-COBRA
Pago y Envío Términos:
Cantidad de orden mínima: 24
Precio: Depending on quantity
Detalles de empaquetado: Cartón
Tiempo de entrega: 8 semanas
Condiciones de pago: T/T
Capacidad de la fuente: 1200pcs por 8weeks
Descripción detallada del producto
Nombre de producto: Equipo de reparación número de parte: RK-PEV
Marca: IMPCO Diafragma: Hydrin (negro); Silicón (amarillo); Fluorosilicone (azul)
Alta luz:

Equipos de reparación de RK PEV IMPCO

,

2 equipos de reparación del regulador IMPCO de la etapa

IMPCO RK-PEV , Two-Stage Regulator EV / PEV Repair Kit , Color Coded Diaphargms
 
MODEL EV & PEV SERIES
TWO-STAGE REGULATOR REPAIR KIT INSTRUCTIONS
Important: Any maintenance, service or repair should be performed by trained and experienced service technicians. Proper tools and equipment should be used to prevent injury to the servicing technician, property or system components. Service repairs should always be performed in a safe environment and the technician should always wear protective clothing to prevent injury.
The IMPCO PPI-47 repair kit instructions will provide the technician information to successfully repair the model EV and PEV regulators. Always inspect the major casting pieces for damage, corrosion or cracks before attempting a service repair. Be sure the repair kit part number you are using is correct for the regulator being serviced. Diaphragms are color coded and have different performance characteristics:
BLACK: Hydrin diaphragm material is the standard material and is well suited for the most common applications.
YELLOW: Silicone diaphragm material is the optional upgrade material that provides excellent flexibility in cold weather climates and is more resistant to chemical contamination.
BLUE: Fluorosilicone diaphragm material provides excellent high and low temperature durability with increased chemical resistance. This material is recommended for turbo applications.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 0
 
 
REBUILD INSTRUCTIONS
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 1
1. Under normal conditions, installation of a complete repair kit should be necessary only at the time of a major engine overhaul or when the converter has been out of service for an extended period of time. Each kit includes the necessary gaskets, diaphragms, seals and some replacement screws.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 2
2. PEV Only (Skip for EV): Remove the spring retainer housing cover screws (23) and cover (24). Remove the housing gasket (25) and secondary spring (7).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 3
3. Remove the cover screws (2) and the cover (3) from the regulator.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 4
4. Remove the secondary diaphragm assembly (4).
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 5
5. Remove screws (10) from the primary diaphragm cover (11).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 6
6. Early Model Only (Skip for Later Models): Remove secondary lever fulcrum pin (8) and secondary lever (5).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 7
7. Later Model Only (Skip for Early Model): Remove the screw (21) and washer (22) holding the fulcrum pin (8).
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 8
8. Remove primary cover (11) and primary springs (12).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 9
9. Remove primary diaphragm (13).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 10
10. Remove primary pin (14).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 11
11. Remove remaining screws from main body (10).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 12
12. Separate upper main body (15) from lower body (18).
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 13
13. Remove body gasket (16).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 14
14. Remove primary seat (17).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 15
15. Install new primary seat (17) to lower body (18) with rubber face down towards the primary orifice.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 16
16. Install new gasket (16) to main body. Be sure to align the gasket as shown using the dowels and primary pin channel to retain the gasket.
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 17
17. While holding the outer edges of the main body gasket (16), place the upper body (15) on top of the lower body (18) with seat installed. Align the screw holes and be sure the gasket is flat around the circumference of the body.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 18
18. Install the screws (10), and tighten them until they are snug, to retain the two pieces for now.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 19
19. Install new primary pin (14).
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 20
20. Install new primary diaphragm (13) using dowel locators to align and retain as shown.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 21
21. Install primary springs (12) using spring locators to align and retain as shown.
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 22
22. Press primary cover (11) in place over the primary springs (12) and diaphragm assembly (13). Insert the two inner screws (9) in the location shown and torque to 22-28 in-lbs. (2.5-3.2 Nm).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 23
23. Early Models: Replace and tighten screws (10) except for the one shown in left photo. Starting at one side of the regulator body, use a diagonal pattern to torque each screw (10) to 35-45 in-lbs. (4.0-5.1 Nm).
Later Models: Replace and tighten screws (10). Starting at one side of the regulator body (15), use a diagonal pattern and torque all screws (10) to 35-45 in-lbs. (4.0-5.1 Nm).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 24
24. Slide the pin through the larger of the two hole openings of the lever (5) and place over a socket that will support the area of the lever around the hole. Using a hammer, knock in the pin (26) through the smaller hole until it is even on both sides.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 25
25. Inspect the tabs on the lever (5) to verify they are not bent and the pin (26) is centered.
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 26
 
26. Insert the seat (6) by pressing the nub through the hole in the lever (5).
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 27
27. Early Models Only (Skip for Later Models): Replace the secondary lever and seat assembly (5 & 6) and fulcrum pin (8).
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 28
28. Later Models Only (Skip for Early Models): Insert the screw (21) and washer (22) securing the fulcrum pin (8). Secure the screw until snug.
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 29
29. Check secondary lever height. While holding the secondary seat (5) lightly against the secondary orifice. Measure the distance using a straight edge between the top of the lever pin and body casting edge. The lever height must be set to 1/32 of an inch (2.4mm) below the top of the casting. If the lever height is incorrect, continue to Step 30. Once the lever height is correct, skip to Step 31.
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 30
30. If necessary, remove the fulcrum pin (8) and lever (5) and bend slightly if required. Do not attempt to bend the lever when installed--unnecessary force on the lever may damage the secondary seat (6).
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 31
31. Early Models: Once the lever height is correctly set, replace the remaining screw (10) and torque to 35-45 in-lbs. (4.0-5.1 Nm).
Later Models: Remove screw (21) and washer (22). Apply Loctite 242 to screw threads and torque to 17-23 in-lbs. (1.9-2.6 Nm). Refer to photo in Step 28.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 32
32. EV Only (Skip for PEV): Slip the spring (7) under the secondary lever (5) making sure it is retained by the two tabs at the sides and the single tab punched through the top of the lever.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 33
33. Replace the secondary diaphragm (4) engaging the slotted link to lever pin shown.
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 34
34. Install the cover (3) to the body aligning the screw holes. Install screws (2) finger tight, then torque to 25-35 in-lbs. (2.8-4.0 Nm), using a diagonal pattern.
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 35
35. PEV Only (Skip for EV): Place the secondary spring (7) on the secondary diaphragm (4) perch. Install the gasket (25).Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 36
36. PEV Only (Skip for EV): Align the spring retainer housing screw holes to the cover (3) and insert cover screws (23). Torque to 7-11 in-lbs. (0.8-1.2 Nm).
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 37
37. EV Only: Apply 100 psi (6.9 Bar) of air pressure to the inlet side of the regulator and test for leaks. Draw a soap bubble across the regulator outlet to verify that no air is flowing through the outlet. If air escapes, the rebuild has failed and the regulator must be replaced. Actuate the primer button and the soap bubble should burst and air flow should be noted at the regulator outlet. Use soap and/or a commercial leak detector solution to inspect the gasket seals around the perimeter of the converter for leaks. If no leaks are found, the repair is now complete.
 
Equipos de reparación de RK PEV IMPCO para el regulador de dos fases 38

 
 
 
 

Contacto
guangqing(anhui)gas technologies co.,ltd.

Persona de Contacto: Mrs. Carrie Liu

Teléfono: +86 13855195806

Fax: 86-551-63664756

Envíe su pregunta directamente a nosotros (0 / 3000)